You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1092 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, November 18th 2015, 6:56pm

by Wet_Boots

You went and bought the controller, so go ahead and try your idea. The worst that happens is that it won't work. If you want a sure thing, you buy the single controller that can handle the entire property.

Wednesday, November 18th 2015, 9:59am

by Curare

Share common wire across 2 timers

Are you referring to something similar to the product link below? I'm trying to visualize how to set this up. Thanks!

Sunday, November 15th 2015, 8:20am

by Wet_Boots

If you employ a single transformer to feed the two controllers, it should work okay.

Saturday, November 14th 2015, 1:18pm

by Curare

Share common wire across 2 timers

My current setup is 2 irrigation timers. One for the back of the house, one for the front. I've purchased a new timer because one of them broke that will support more valves but it doesn't have quite enough to merge all of them onto one timer. Consequently, i want to leave some currently unused valves on the old timer and move some of the other ones to the new timer. My question is can I share a common wire between 2 timers and if so, how would I do so?

For example - Setup Today
Timer 1: F1, F2, F3 valves (all wrapped up in its own irrigation wire with it's own common wire leading to timer 1)
Timer 2: B1, B2, B3 valves (all wrapped up in its own irrigation wire with it's own common wire leading to timer 2)

Intended setup:
Timer 1: F1, F2, B1, B2 (B1, B2, and B3 currently share a common wire so it would have to link to both timer 1 and 2)
Timer 2: B3

Is this possible and if so how? I'm thinking most simple is just splice the common wire from the back irrigation wiring and link it to both timers so timer 1 will have a common wire from the front irrigation wiring as well as the back irrigation wiring but I have no idea of the consequences of doing so.

Sorry if i'm not using proper terminology and thanks in advance.