You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1079 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, November 6th 2015, 7:51am

by Wet_Boots

Go back to your pilot device that worked, and proceed from there. Your "need to fit" appears to have been vetoed by the physics of turbulent water.

By the way, most venturi injector assemblies have the entire flow passing through the venturi, in order to generate the needed suction force. Your pictured assembly is anything but that.

Thursday, November 5th 2015, 8:18pm

by edwinhumphries

Venturi Injectors

Does anyone know anything abut venturi injectors?



I've been working on a project for some time, which involves using a
venturi injector to dose a small amount of chemical into a flow of
water. During the pilot stage, everything was linear, and worked fine,
but I had to fit into into a smaller space, so folded it through 2
elbows and the venturi refused to pull a vacuum. Checked online, and
found that a pressure drop between the inlet and outlet of the venturi
is required (so why did it EVER work?). So I revised the layout
(see here) to put a pressure regulator and filter across the ends of the
venturi, which should create just such a pressure drop, but still no
suction.



I'd really like some help! :huh: