You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 860 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Thursday, May 12th 2016, 4:51pm

by SunCoLawns

Have you considered landscaping?

Sunday, May 8th 2016, 6:32pm

by CJAlbertson

Yes you CAN dramatically cut back on the amount of water you use. Here in California we are asked to reduce use by 25% and I'm sure we will have to reduce use even more in the years ahead.

You can cut use by half or more with this two step process:

Step one: evaluate your landscape and see how much grass you can remove and replace with something else. Sometimes removing some makes the over al look more attractive. For example replace that rectangle of green grass with an oval design. You spray it with "round up" then dig it out.

Step two. Replace the sprinkler heads with a subsurface drip system. Basically you burry hoses in many parallel trenches spaced about 12 to 24 inches apart and 4 to 6 inches deep. This completely eliminates over spray and evaporation by inserting water only into the roots at a VERY slow rate. (the rate is determined by the soil type)

With both steps you can get to less than 1/2 the amount of water you are using. There is a high initial cost but with your cost of water you'd get a pretty fast pay back, inside of a year, I'd say.

In my current project we are starting from scratch having just rototiller'd the entire lot so in addition to the above two steps the new grass will be a variety that grows slowly (a genetic dwarf fescue) and uses very little water after it is established. We are hoping to get water use to 75% less over all.

Wednesday, August 12th 2015, 9:39pm

by Wet_Boots

Some water rates include sewage fees, which is unfair for those not putting all that water down the drain. A second water meter for the sprinkler system might be had, with a lower rate to follow.

Wednesday, August 12th 2015, 7:02pm

by mrfixit

Hi, I've never used these but take a look at the video. It might be worth a shot. Maybe do a section of your yard and see how it goes.
Lawn Polymers

Wednesday, August 12th 2015, 11:13am

by dae06

Need help to cut watering costs

My lot is 38,000 square feet and water 24,000 square feet. I am using Hunter I-20 stainless rotor heads for 8 zones and spray heads for 1 zone. My math shows to get 1" of water over this area I need 15,000 gallons/week. My water costs me $7.50/1000 gallons. At this rate it costs me $112.50/week to water if mother nature does not help me out.
First of all, does this sound correct to you? Second, does anyone have any suggestions as to how I can cut the watering back and still keep a nice lawn?

When I installed the irrigation system years ago, our water rate was $2.25/1000 gallons. Since then, my water rates sky rocketed.

I can't afford to keep watering my lawn at this rate. Any suggestions are appreciated.

Edit: I just contacted my city clerk and she informed me that they restructured the water use billing. I am now paying $11.31/1000gallons ;(. So I am now paying $170.00/week for 1" of water for my lawn. That's crazy!!!!!!