You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5242 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Thursday, September 16th 2004, 2:58pm

by TMC2004

funny pipe does not require a clamp just push on the barbed end and youre done. As far as the length ive read start with 12" to 18" piece and cut down as needed. The the outletside of the tee can face up or either side depending on your situation but not down. Here is a link that will give you good info and pics.

Thursday, September 16th 2004, 4:57am

by ejzajac

It seems counterintuitive to use 1/2" "funny pipe" to a 3/4" fitting into a 3/4" rotor. Does anyone make a 3/4" "funny pipe"?? Hunter swing pipes with 3/4" fittings are very restrictive.

Friday, July 9th 2004, 2:13pm

by shastah2o

Could someone provide details on using the funny pipe with the Hunter PGP rotor? I take it you use 2 3/4 mpt elbows? Does it need to be clamped or glued to the pipe? How long should the funny pipe be? How is the tee on the lateral positioned: outlet up, sideways or bottom?
Thanks: Shasta

Friday, January 16th 2004, 6:31am

by Rays Sprinklers

Definatly Funny Pipe.....much more positioning options! Hunter Swingjoint is very restrictive

Wednesday, January 14th 2004, 3:45pm


Funny pipe all the way.

Wednesday, January 14th 2004, 9:48am

by drpete3

cant speek for the other 2 I always use funny pipe and love it.

Wednesday, January 14th 2004, 5:30am

by paterjb

Swing joint question

Still planning;
Since I am near the low end of pressure to my heads (~25psi)after RPZ, Main and laterals,
I am in a pickle concerning which swing joints to order.
Choices are
1.Rainbird model TSJ-12075, 12in,3/4 X 3/4 mpt-psi loss = 1.5 psi @ 6GPM Cost = ~ 16.00$ each (WOW!!!!!)
2.Hunter swing joint, 12in,3/4 X 3/4 mpt =2.9psi loss @ 3GPM (1.50$ea)
3.Toro funny pipe, 12in with Two,3/4"mpt elbows = 0.52psi loss @ 3GPM
Don't know the Toro price yet?

Any suggestions? Are the Hunter swing joints that restrictive?