You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2748 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Tuesday, October 10th 2006, 4:11pm

by caleb

I am having the exact same problem with an AVB valve. All the air comes back through the AVB? I have a small air compressor but it has worked in all the past houses I have lived in. Do you need more pressure than I can supply?

Sunday, June 25th 2006, 5:58pm

by xpedient

How many PSI are you running on your compressor when blowing out?

Saturday, October 8th 2005, 7:32am

by Beto

Help PLEASE!?

I am having the same problem as john4man. I have a hunter controler, with hunter SRVs and Watts PVB 800M4 FR. I closed the main in the basement, open the faucet outside (mounted below the PVB). Open both screws, before and after teh PVG. Once all is drained, I then hook up the compressor to the testcock on the inlet side of the PVB, close the testcock passed the PVB (passed mean water comes from the house, goes thru PVB and then there is the testcock I am talking about). Turn the controler on. Turn the compressor on. And yes, air comes out of the PVB. I have tried all combinations and the PVB does not seem to be closing... Do I need to remove the stem inside the PVB? Do I need to manually open the SRV?

Thanks for the time!!

Monday, November 10th 2003, 12:50pm

by Rays Sprinklers

is it a PVB....? Once the water is clear from the backflow and the line, you can shut off the valve after the PVB (on the backflow) so that air wont go past it..

Monday, November 10th 2003, 8:46am

by john4man

Winterization...Air comes out backflow

I am winterizing my sytem myself for the first time. When I hook my compressor to the spigot after the backflow device, the air comes out the backflow device (bell top) instead of pressurizing the main line to the sprinkler heads. How do I stop the air from coming out the backflow device?

Thanks!