You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5526 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, October 31st 2003, 12:22pm

by Rays Sprinklers

i dont understand? Your valve drips with the system? Please explain a little clearer so i can further help you

Thursday, October 16th 2003, 1:06pm


Bad Valve??

I have an old Rainbird Valve that has a bleeder valve on the top. My drips on the irrigation system stay on with a slow flow to them all the time. I just recently replaced the diaphragm and solenoid. After I put the system back together the system still leaks out the the drips that run off of that valve. Should I just replace the old valve? Currently my valve has female ends with male ends that are pvc cemented to the irrigation pipe. I was wondering if there are any valves out there that have female union ends on them so if I could just cut my valve in half and remove it, I wouldn't have to cut out any of the pvc irrigation pipe?