You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4020 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Tuesday, August 19th 2003, 5:16pm

by RVLI

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote"><i>Originally posted by drpete3</i>
<br />yes but I thought you have used a brand name in the past. Is it a dawn saddle t?
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

Yes, a Dawn Saddle Tee by Dawn Industries. Also known as a "Quik Seal" Tee.


Found here: http://www.sprinklerwarehouse.com/shop3/MiscFittingsPoly_FittingsTees.html

[:D]

Tuesday, August 19th 2003, 1:58pm

by Rays Sprinklers

If you are using the Standard Tee (i use them) i would use Crimp clamps...you simply slide on the clamp..insert the fittings, and using a "Crimper tool" squeeze the raised bump on the clamp shut.....thats it (much eaiser than using worm gear clamps) I do believe Sprinkler warehosue carries the clamps and the tool!

Tuesday, August 19th 2003, 10:13am

by drpete3

yes but I thought you have used a brand name in the past. Is it a dawn saddle t?

Tuesday, August 19th 2003, 8:13am

by RVLI

<blockquote id="quote"><font size="1" face="Verdana, Arial, Helvetica" id="quote">quote:<hr height="1" noshade id="quote">RVLI help me out<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

You mean dawn bolt saddle tee's?

Tuesday, August 19th 2003, 8:00am

by drpete3

As I have stated many times try to use saddles as much as possible. Either blazing saddles or the other standard type. I cant think of the name. RVLI help me out. when I do have to use slip type T's etc I use the screw type of hose clamp. I can get them locally for about 60 cent a piece.

Check SW under fittings and you will see the saddles that I am talking about. SW has lots of good accessories. Also if you are new in doing irrigation funny pipe is also great because no clamps are required.

Tuesday, August 19th 2003, 6:20am

by craigwagner6

Clamps for Poly Pipe

Does anyone have any suggestions on what type of clamp is the cheapest and/or easiest to use for clamping fittings into 1" poly?
Does Sprinkler Warehouse carry these? If not, any suggestions on where to get them?

Thanks,
Craig