You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5734 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, August 13th 2003, 8:16am

by Rays Sprinklers

Exactly what RVLI said.....the most simplest way is what RVLI said........attach a short piece of PVC pipe, and a female adapter on the end. Screw in a 1" POly male adapter and attach the Poly, unless you can find a socket fitting.

Rays Above and Beyond Automatic Lawn Sprinklers

Monday, August 11th 2003, 5:58pm


Socket fitting. I can only find them at my local supplier, but that is about the only place I can find them. If your interested in them, shoot me an e-mail. Another way to do it would to be to stick a little section of PVC in the valve and connect a slip x female with a male x insert on it.

<img src="" border=0>

Rock Valley Lawn & Irrigation

Monday, August 11th 2003, 5:41pm

by DIYer

Valve Fitting

I need to connect a 1" poly pipe to a 1" Hunter PGV Jar-Top Control Valve that has a slip fitting (non threaded). Can anyone suggest what type of fitting I should use to do this and where I can get it.

Thanks for your help,