You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4065 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Monday, September 8th 2003, 4:12pm

by Rays Sprinklers

run by me againt he heads and the amount on the zones, and the nozzle sizes and then well adjust from there

Monday, September 8th 2003, 10:38am

by rnakawat

I don't know if I'm measuring the pressure correctly, but it's 120 PSI. I have an outside hose outlet that's part of the same line the valves are on. The reading from that outlet is 120 PSI. The outlet uses the same diameter piping as the rest of the line. It's 3/4 inch PVC.

Ryan

Monday, September 8th 2003, 10:12am

by Rays Sprinklers

I believe it is the double check then the pressure regulator......the backflow should be first before anything....what is your pressure that you need a regulator? You can also get a pressure regulating double check found at sprinklerwarehouse. [8D]

Sunday, September 7th 2003, 9:17pm

by rnakawat

>Does the water leak out of all the valves?

It leaks out of 3 of the 5 valves. Two appear to be fine.

I'm also thinking of installing a pressure regulator. Would the proper order be the Pressure Regulator, then the double check valve or visa versa.

Thanks.

Ryan


Sunday, September 7th 2003, 4:06am

by Rays Sprinklers

When antisiphon valves are used it is very important to install them out of the way....12-16" above the highest sprinkler head....soo if they are not 12-16" above the hihest slope you wont be getting very well performance....to fix the backflow problem...you can install a Double Check valve before the valves, and leave the antisiphon...of install a double check valve, and convert the anti-siphon valves to inline valves..... (irritrol 2400T) Does the water leak out of all the valves?

Saturday, September 6th 2003, 8:38pm

by rnakawat

Backflow advice for sloping landscape

My existing sprinkler system has valves with built in anti-siphon values. (AVB's?) My house is on a hill, were the backyard is at the highest point and the front yard is at the lowest point. The valves are located on the side of the house. (IE, not at the highest point of my yard.) I notice that when some of the valves turn off, water leaks from the anti-siphon cap.

My first question is this normal behavior? (My assumption is no.)

How should I fix this problem? (assuming that it is a problem.) Moving the valves to the highest point of my yard would be difficult. Can I install a double check value or something else before the valves?

Thanks in advance,

Ryan