You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4008 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 9 posts

Sunday, August 10th 2003, 12:59pm

by Rays Sprinklers

Hey,
Definatly make it a point to attach to the mainline either outside, or in the house depending on where you are located. You will have much better results and performance

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Saturday, August 9th 2003, 3:44am

by drpete3

I also agree with RVLI. I go by the old saying"IF its a job worth doing its worth doing right" Good lock.

Thanks,

Pete

Friday, August 8th 2003, 10:46am

by lgnguyen

Hi Xliang,

I agree w/ RVLI, you should connect the water supply into mainline. There is aways a way to get into water meter. I never image that the finish basement w/out keeping water meter/ and main valve accessible.

Also, don't forget to install a backflow preventor. It is required by law for safety of your family. (Check local code)

Hope this help.

Friday, August 8th 2003, 10:43am

by lgnguyen

Hi Xliang,

I agree w/ RVLI, you should connect the water supply into mainline. There is aways a way to get into water meter. I never image that the finish basement w/out keeping water meter/ and main valve accessible.

Also, don't forget to install a backflow preventor. It is required by law for safety of your family. (Check local code)

Hope this help.


Wednesday, August 7th 2002, 1:23pm

by xliang

Thank you very much for your help. I will see if I could attach to the mainline.


Wednesday, August 7th 2002, 12:19pm

by RVLI

I think I would still connect to the mainline. It will probably get your more GPM, and maybe even more pressure.

Backflow Prevention---There are different backflow prevention devices from keeping water from siphoning through the pipes into your house. What happens is, say there is some fertilizer on the sprinkler head. It will go through all of your pipes in the system and will eventually get into your house. These devices connect to the mainline and prevent water from coming back into your house.

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>I still have trouble in understanding the flow balance. I read some books, which state that balancing flow is necessary to prevent the dry or wet spots. Taking Hunter I-20 Ultra as an example, if I use Nozzle 1.0 for the two quarter circles, 2.0 for the half circle, 4.0 for the full circle, the total GPM is 8.6. Since the Nozzle 1.0 cover the quarter circle 4 times when Nozzle 4.0 finish one full circle, I guess the water is evenly distributed: the corresponding GPM is 4x1.2 (quarter circle), 2X2.0 (half circle), 1x4.2 (full circle). Am I correct?

<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>

yes that is correct

Hope I helped here.


Wednesday, August 7th 2002, 10:21am

by xliang

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>
Here are the answers to your questions-
Thanks a lot.

(1) Connect to your mainline in your basement or out side after the water meter depending where you live. If you use the faucets, you do not have backflow pervention. When you connect to your mainline, you have the capibility to get all the pressure and GPM's

Since my basement has been finished and the mainline outside is diffcult to modified, I plan to combine flows from two faucets into one source line for the springler system. I have tested this combination and achived 10 GPM. Is that a problem? If I have to use the mainline after water meter, I may have to get some plummer to work on.

In addition, what do you mean by "do not have backflow pervention"?


(2) For this you should really check into what you GPM would be from the mainline, not the faucet. Let me know when you find out. But how to find out what nozzle to use for your rotors, take the nozzle GPM times how many sprinklers you have. Make sure the GPM for the four sprinklers is under 10 GPM, or how many GPM you may have.

I still have trouble in understanding the flow balance. I read some books, which state that balancing flow is necessary to prevent the dry or wet spots. Taking Hunter I-20 Ultra as an example, if I use Nozzle 1.0 for the two quarter circles, 2.0 for the half circle, 4.0 for the full circle, the total GPM is 8.6. Since the Nozzle 1.0 cover the quarter circle 4 times when Nozzle 4.0 finish one full circle, I guess the water is evenly distributed: the corresponding GPM is 4x1.2 (quarter circle), 2X2.0 (half circle), 1x4.2 (full circle). Am I correct?

(3) The rotors really have nothing to do with the controller, but yes you can use different brand controllers with different brand rotors. This goes for sprays and valves, too.

Great.

<hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>


Wednesday, August 7th 2002, 8:25am

by RVLI

Here are the answers to your questions-
(1) Connect to your mainline in your basement or out side after the water meter depending where you live. If you use the faucets, you do not have backflow pervention. When you connect to your mainline, you have the capibility to get all the pressure and GPM's

(2) For this you should really check into what you GPM would be from the mainline, not the faucet. Let me know when you find out. But how to find out what nozzle to use for your rotors, take the nozzle GPM times how many sprinklers you have. Make sure the GPM for the four sprinklers is under 10 GPM, or how many GPM you may have.

(3) The rotors really have nothing to do with the controller, but yes you can use different brand controllers with different brand rotors. This goes for sprays and valves, too.


Wednesday, August 7th 2002, 4:52am

by xliang

How to balance the flow

I am planning to install the splingler system in September. My facet has 55 PSI and 10 GPM (when I combine two facets, otherwise only 6 GPM). I need to choose Rotors between Rain Bird and Hunter. A few questions:

[1] Is it ok to combine two facets to increase the GPM? Is there any potential problem I need to prevent for this combination?

[2] In a typical zone, I have 2 quarter, 1 half and 1 full circles. How can I choose Rotors with specific nozzles to balance the water flow in the same zone. From your web info, I found

Rain Bird 5000 Standard Angle has Nozzles(GPM): 1.0(1.23), 1.5(1.60), 2.0(2.56), 3.0(3.95), 4.0(4.96), 6.0(7.03)

Hunter I-20 Ultra has Nozzles(GPM) has Nozzles(GPM): 1.0(1.2), 1.5(1.6), 2.0(2.0), 3.0(2.7), 3.5(3.4), 4.0(4.2), 6.0(5.5), 8.0(7.6)

Which set shall I choose?

[3] Can I use Hunter's rotors while Rain Bird's controller?