You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4176 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Wednesday, July 16th 2003, 9:03am

by Rays Sprinklers

Any time im glad everything worked out!!~

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Tuesday, July 15th 2003, 4:35pm

by dspayne

I think I found the problem. There is a small nipple on the underside of the upper valve body (solenoid mounts directly over it). There is an o ring that fits around the nipple so that when the 2 halves are screwed together the space is sealed off. When the valve was assembled at the factory, the o ring was not seated properly and was pinched. Not forming a good seal which allowed water and air to leak in. Thus causing the leak and also the valve stopped closing (that zone ran for 4 hours last Saturday). Thanks for the help.

Scott


Saturday, June 28th 2003, 6:50pm

by Rays Sprinklers

If theres anyplace thats odd for water toleak its there. Try tightning the soloneiod down, if not theres probably something wrong with the valve, although i dont use Anti-Siphon Valves

Does it happen with all ur valves?

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Friday, June 27th 2003, 7:25pm

by dspayne

no, underneath of where the solenoid plugs in is a small opening. I would have guess it was something like a pressure relief opening or some kind of drain. However, the only time water comes out is when the valve is open, not when it is closed.


Thursday, June 26th 2003, 7:06am

by RVLI

Let me see if I'm guessing right...
The water is leaking where the soleniod and valve thread into each other?? Right?


Thursday, June 26th 2003, 6:29am

by dspayne

Irritrol Valve Leak?

I just installed a new Irritrol 2713APR 1 inch- Anti-Siphon Control Valve w/Flow Control. When I open the valve (electrically or manually), there is a leak from an opening underneath the solenoid. It's not a steady stream, but a fast drip. Is this normal? This is the first valve in my new system and I have been unable to find any documentation on this valve other than sales rhetoric. Thanks