You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1819 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Tuesday, July 1st 2014, 8:36am

by Wet_Boots

Dirt or some other obstruction in the passageways where the solenoid water flows. Try probing with a stiff wire.

Tuesday, July 1st 2014, 7:17am

by Bsktmouse

Replaced solenoid and diaphragm, now what

Zone 2 the last two heads would not pop. Poor pressure on the other 5, so replaced solenoid. Worked once when repair guy was here, then didn't next day. Did research and replaced diaphragm ourselves. (couldn't justify another $150 for work we could have done with a little research) Worked twice and now again back to not. Works when turning on manually at the valve. Could it be dirt inside the valve? Good pressure, all pop when turned on manually. At a loss right now.