You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1279 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Tuesday, June 10th 2014, 11:49am

by Wet_Boots

You got the idea. Make sure you have the right valve. (color-coded zone wiring will help you here)

Monday, June 9th 2014, 4:29pm

by jfed (Guest)

ok - thanks. is the valve the piece buried in the box in the ground with the wires sticking out?

Monday, June 9th 2014, 4:23pm

by Wet_Boots

You need to repair or replace the zone 1 valve, so it stops sticking open.

Monday, June 9th 2014, 4:13pm

by jfed (Guest)

zone won't shut off

I have a Hunter system, about 13 years old. This weekend, I manually set zone 1 to run (from the controller pad). I noticed much later it was still running. I turned the controller to off - still running. I unplugged the controller and took the fuse out and it still kept running. I had to shut the water off to the irrigation system. So the controller and zone 1 have lost the ability to communicate. Where do I start to fix that?

Thanks