Reply
Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.
Attention: The last reply to this post was 5377 days ago. The thread may already be out of date. Please consider creating a new thread.
The last 7 posts
Any Time!
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Ray,
Thanks for the advice, it's much appreciated.
Hey,
Depending on when it was instaleld, who installed it, where you live, it can depend. The only way to find out is to actually dig up the sprinkler head, and look at the pipe.
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Thanks for the info. One last question. Is the supply line to the sprinkler head flexible or solid type PVC?
Or a swing joint with a small nipple so you don't relocate the head.
If you want to raise sprnkler heads (PGP) you will have to dig down to the pipe, and either lift the line and put drt underneath or add a bigger nipple (piece of pipe connecting sprinkler to fitting, you can find them eaisly at sprinkler warehouse. com or your local hardware store. Those are really the only two options you have
Let me know what you think
Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers
Help with raising sprinkler head?
Hello All,
Can anyone tell me how to raise a sprikler head 1-2" in an exisitng installation? One station at the end of our driveway is too low in the ground, and it eventually stops turning because of dirt clogging the head. I believe the heads are PPG if this helps. Thanks.