You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4128 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, July 12th 2003, 11:28am

by Rays Sprinklers

EXACTLY,,,,, dont pull the actual head out, its not necessary, if it is spray heads you may want to consider replacing the entire nozzle beacuse they are rather hard to clean. also when you flush your valves, take all the valves apart at once, and flush, dont do one at a time, because then the sediements move back and forth through the lines

if they are rotors just take the nozzles out (thouse you can clean easily) and replace once the lins are thouroghly flushed

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Wednesday, July 9th 2003, 4:54am

by RVLI

Yes you should. And just to be safe when your taking the nozzles off in the head to let the lines flush for a while.


Wednesday, July 9th 2003, 3:18am

by ricky_nu

unclog sprinkler heads

my system was installed without a screen filter, and is fed by well water. My well pump sent up some small sediment which found it's way into my control valves and heads. Is there an easy way to clean all of this out (the heads don't spray nice and valves dont operate correct now), or must I disassemble all valves and pull all heads to clean this properly?



ricky-nu