You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1677 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, March 18th 2014, 8:00pm

by SmartEarthAustin

It's pretty tough to max out a zone with drip tubing. The flow rate of embedded emitters is so low.
If it is properly installed with a grid like pattern you should be able run up to 1000ft no problem.

I do agree that you should run your main lines PVC the convert to drip after the valves.

Monday, March 3rd 2014, 10:58am

by Wet_Boots

It all depends on the flow rate. More flow equals less possible distance. Don't cheap out on pipe sizes, and waste all your efforts. You can run regular pipe from the drip regulator/filter to the areas being watered, and at those locations you can branch off with drip.

Monday, March 3rd 2014, 9:27am

by ameyer (Guest)


hello, I am installing a drip system and now have a 3/4 main line that I have valves off that line for different zones. question is how far can I run a 1/2 line off the 3/4 line? thanks al