You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4080 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Thursday, May 22nd 2003, 4:47am

by Rays Sprinklers

Oh,,,, you can do that too........In my area the mainline is in the ground because we dont have basemens. Thats why i suggested in a garden, because you wouldnt want that up on your lawn.

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Saturday, May 17th 2003, 5:05pm

by RVLI

<BLOCKQUOTE id=quote><font size=1 face="Verdana, Arial, Helvetica" id=quote>quote:<hr height=1 noshade id=quote>Remember to put the PVB in a garden <hr height=1 noshade id=quote></BLOCKQUOTE id=quote></font id=quote><font face="Verdana, Arial, Helvetica" size=2 id=quote>

Install your PVB right when the mainline comes out of the house, not in the garden where it could get damaged by shovels and tillers in the garden.

The following picture is how I install my PVB's:
<img src="http://www.lawnsite.com/attachment.php?s=&postid=296915" border=0>



Edited by - RVLI on May 17 2003 10:06:46 PM

Saturday, May 17th 2003, 2:20pm

by Rays Sprinklers

I would use 1" (much better) after the backflow use PVC (schedule 40) right to your control valves. Remember to put the PVB in a garden out of the way 12" above ground and OUTSIDE. The Double checks can go in the ground or inside.



Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Tuesday, March 19th 2002, 11:12am

by RVLI

I have fixed many backflow devices that are too small in pipe size. I would use 1" copper from your copper mainline up to your backflow device, then use PVC pipe for your sprinkler mainline. Do not use poly for your mainline. It cannot withstand the constant pressure that mainlines hold. Hope this helps and good luck!!


Sunday, March 17th 2002, 8:16am

by chpsk8

3/4" or 1" Backflow

I am curious if I can use a 3/4" backflow on my system or should I use a 1". I am tapping in right after the meter in my house (3/4"). My thought was to use 3/4" copper to span the 17' to the outside of my house, then either convert to 1" copper and install a 1" Febco, or keep the 3/4" copper and go to a 3/4" backflow, then out of the backflow size up to my 1" poly main line. What are the pros and cons of 1" backflow vs. 3/4. I want to go the best route possible, both economical and performance.