You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5729 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, May 16th 2003, 2:55pm

by Rays Sprinklers

Use the Toro 570's 12' Brown nozzles, half pattern on one side spaced MAX 12'

Rays Above and Beyond Automatic Lawn Sprinklers

Friday, May 24th 2002, 3:34am


One way you could do this, but it won't keep your sidewalk dry, is to install a Rainbird 3500 or the Hunter PGM. This would take a lot less fittings and a lot less time to install. The down part of the subject it that for a strip that is 7.5 feet long is that it might get your sidewalk wet, or you could install them on the sidewalk side and have the road get wet. If you don't want this, I would use the Ranbird 1800 on each side about 9' apart, as you said.

Sunday, April 28th 2002, 1:54pm

by munsch

Too big for side strip - need design help

I have a boulevard 7.5' X 80' and would like to know the best way to install sprinklers for it. It is too wide for side strips, so right now I have it drawn up with 8' spray heads on each side of the boulavard every 9'. It seams like a lot of sprinkler heads (more than I'd like to use/buy). Is there any other ways to water this area. Also I see a lot of contractors around my area installing sprinklers in the same size area with sprinklers along just one side, is that acceptable, what about head to head spacing.