You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4184 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, May 12th 2003, 10:06am

by Rays Sprinklers

Hi,
I would use 2 small rectangle boxes with 3 in each, or you can buy a SUPER JUMBO box
which costs about 80 bucks and put them all in one. These Super Jumbos are 2.5 feet deep
and 3 feet long, and are a pain to bury

Ray
Rays Above and Beyond Automatic Lawn Sprinklers


Raymond Padula Jr.

Friday, May 24th 2002, 3:41am

by RVLI

Generally, rhe most valves you can put in a Rectangular box is 4. Get two boxes and put three in each, that way you have room for servicing, if you ever need to replace a valve.


Wednesday, April 24th 2002, 3:24am

by daronson

I am in the process of installing a 10 zone system, with 2 manifold boxes. I already installed one manifold assembly using pvc manifold tees that slip together and have a female thread to accept the valve. I have 5 valves in this box, but added a 6th manifold "elbow" and capped it (for future use if needed).

Getting to the point - I have a six-valve manifold in a rectangular box, however, it is a JUMBO box which measures 18 X 24. Standard boxes are 12 X 18, which is too small for 6 valves, and kind of tight for 5 valves. Cost was $31 from the Professional Supply Store based in Florida (I bought most supplies from them mail order - best prices for most parts). The manifold tees were purchased at a local irrigation supply store, or a plumbing/pump supply store might have them.


Monday, April 22nd 2002, 4:50am

by mspencer

valve manifolds

I would like to put 6 valves together for 6 different zones. Do you have any pictures which would show this assembly and would fit in a retangular valve box?