You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5502 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, May 25th 2003, 5:13pm

by Rays Sprinklers

i use thirteen strand wire, wether its 1 zine or 12. Basically thats not necessary but i only stock one roll, this is good for future add ons

Rays Above and Beyond Automatic Lawn Sprinklers

Thursday, May 1st 2003, 2:58pm


They have wire all the way up to 13 strand. Also, if you want to expand in the future I would get larger wire now that way you don't have to replace it in the future.

Thursday, May 1st 2003, 8:17am

by drpete3

You need a 6 conductor wire. The one neutral wire is connected to every valve.

Monday, April 28th 2003, 3:57pm


How many total zones do you have? If you have 5 total zones, then you need a 6 conductor wire so you can use one for the common wire.

Monday, April 28th 2003, 4:24am

by ryounker

Wire selection

You have various wire available by conductor. I intend to have 5 valves in one location. Am I to assume that I should be looking for wire w/ 6 conductors (w/ one neutral) or is this the total number of single wires in the jacket which would only support 3 valves?