You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5775 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, May 31st 2003, 10:11am

by Rays Sprinklers

I would install Toro 570 12' Half Nozzles Along one side 10' apart. If its only 9" acroos (wide) that will do fine!

Rays Above and Beyond Automatic Lawn Sprinklers

Friday, April 4th 2003, 10:44am


When I install sprays on strips, I place the spray heads in a triangular pattern, with the distance according to pressure. I will try to find an example for you somewhere on the internet tonight. A handy manual that will help you lots, it the Hunter Residential Design Manual. You can download it off the internet at:

Friday, April 4th 2003, 5:14am

by Brad

Forgot to mention this is for grass

Friday, April 4th 2003, 4:14am

by Brad

9'x50' Strip Design

What is the best design for this scenario, spacing heads every 9' or using a strip head?