You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4045 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Thursday, March 27th 2003, 4:28am

by drpete3

I agree with the above comments. I would replace the whole thing. If cost is an issue maybe consider other backflow prevention methods.


Sunday, March 23rd 2003, 4:40pm

by RVLI

Look at some of the double check assemblies at the Sprinkler Warehouse online store and see if yours looks somewhat identical to any of them. I don't think Toro makes double check assemblies, but they make just a pressure vaccuum breaker. You will most likely have to replace the assembly, just save money and time right now rather than having to fix it again. I would suggest you just replace it to prevent further problems. If you find what brand it is, you might be able to find the part that is missing and replace it, but I am unsure if whoever the MFG. is, if they make that model anymore, but they still might have replacement parts.

Thanks,
Alex


Sunday, March 23rd 2003, 1:16pm

by tcameron

Quoted


Do you know the brand?


That is the problem I'm running in to. The whole setup was buried in mud and had to be dug out. The only telltale markings on the double check were those I mentioned in the previous e-mail. I was hoping that those were enough to identify. My guess is Toro since the control box and most of the heads were Toro.


Sunday, March 23rd 2003, 5:01am

by RVLI

Do you know the brand?


Sunday, March 23rd 2003, 3:57am

by tcameron

Old Double Check Valve

I have a double check valve (probably 25 years old) that is leaking from around where one of the flow control handles is seated on the valve. The nut is cracked and I cannot seem to find a proper 3/8" replacement with the correct threadcount. The only identifying marks on the double check are:
805 Ser. / 12767 Any ideas? The sprinkler head are mostly Toro and the controller was a Toro. Plumbing supply stores have not been able to resolve and I'd like to avoid replacing the entire valve assembly.