You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5432 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Tuesday, August 5th 2003, 3:39pm

by Rays Sprinklers

<img src=icon_smile.gif border=0 align=middle>

Rays Above and Beyond Automatic Lawn Sprinklers

Tuesday, August 5th 2003, 3:38pm

by Rays Sprinklers

<img src=icon_smile.gif border=0 align=middle>

Rays Above and Beyond Automatic Lawn Sprinklers

Monday, August 4th 2003, 4:55am

by drpete3

Warren Thanks for you reply. How well do you know pumps and wells?



Friday, August 1st 2003, 9:59am

by Rays Sprinklers

Exactly what Warren said!! (lol)

Rays Above and Beyond Automatic Lawn Sprinklers

Thursday, July 31st 2003, 2:56pm

by Warren

With regard to GPM's from any given well, there are several things to consider before you even reach the pump.

First is the underground source of water and how and where your point hits the source vs how your neighbor's hits the source. He may be in a much more porous location and is able to pul more water from the bed than you can is you are in a tighter material.

Second, the longer you pump a well, the greater the underground void around the point becomes. The larger the void, the greater the initial volume of water your well will product. Again, however, if the general layer of material you are in is less permeable, then you are bound to reach a less maximum constant GPM.

Third. Pure volume not dependent on the underground source is strictly a matter of pipe size and pressure applied. The smaller the pipe the less volume if the pressure remains a constant. So if you want the maximum volume you must have the maximum diameter pipe you can running into the pump. Any reduction in size prior to the pump will reduce the volume by default.


Thursday, June 26th 2003, 11:04am

by Rays Sprinklers

Well if it is the EXACT same set up as your neighbor, than the aact that you reduced before the check valve then thats the reason for your lower GPM>>>>although 10 GPM is fine for a sprinkler system. Im not so sure about wells and pumps, but if its exactly the same without any other factors, than thats your reason!

Rays Above and Beyond Automatic Lawn Sprinklers

Sunday, June 1st 2003, 10:04am

by rjhuss

New Well and Pump - Low GPM ????

I just installed a new shallow sand point well ( 25ft). I used a 2" pvc point. On the surface I reduced the 2" pvc to 1.5" then connected a check valve and a union to the front of my pump.

The pump I am using is a Myers QP15 ( 1.5hp).

My configuration is almost the same as my Neighbors setup with the exception that he used a 2" check valve before he reduces to 1.5" for the pump.

This configuration for me is only producing about 10 GPM. My neighbor is getting about 18 - 20 gpm out of his setup.

All GPM measurments were done using a piece of 1" poly and a stop watch and 5 gal pail.

Does anyone have any idea's why my GPM is so low?
Could the size of the check valve make a difference?

Thanks for your help.