Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 3659 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information

Username

Subject

Message

Settings

Convert URLs

Automatically converts internet addresses into links by adding [url] and [/url] around them.

Enable smileys in this message

Smiley code in your message such as :) is automatically displayed as image.

Enable BBCode in this message

You can use BBCode to format your message, if this option is enabled.

Security measure

Security code

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, May 12th 2003, 12:14pm

by Rays Sprinklers

If your digging the trenches your self, dig them so that when sprinklers are installed the top is level with ground, if your pipe is being pulled it will be 8-10" deep and when using smaller heads you will need taller risers, or funny pipe

Thanks
Ray
Rays Above and Beyond Automatic Lawn Sprinklers

Go to the top of the page

Sunday, November 10th 2002, 8:22am

by RVLI

Here in NW Iowa, we install the mainline at 12-18" and laterals at 8-10" Thanks,

Go to the top of the page

Saturday, November 9th 2002, 1:37pm

by Roofer

Depth of install?

How deep should an installation be? I live in St. Louis, and I've had people tell me anywhere from 6" to 18". I realize the top of the valve boxes will be at grade, as will the tops of the heads, but how deep should the pipe be?

Thanx,

Roofer

Go to the top of the page