You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 5410 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Wednesday, July 30th 2003, 1:25pm

by Rays Sprinklers

Yes Definatly anywhere from a minute on....i would replace with a Pro-C if you have a 12 station system!

Rays Above and Beyond Automatic Lawn Sprinklers

Sunday, August 25th 2002, 11:18am

by osha

Actually, it didn't need a new clock. The problem was that I had the cycle running for under an hour and so the cycle began again. I extended the cycle to over an hour and no problems since. Seems like you should be able to run a cycle that lasts less than an hour, though.

Sunday, August 18th 2002, 9:43am

by nestors

The clock just needs to be replaced ,even if you can repair it ,it will cost more than a New One . Nestor's...

vincent nestor

Friday, August 16th 2002, 10:37am

by osha

Imperial 12 Station starts over

I recently bought a house with a very old Imperial Valet 11 station controller. Recently, after completing a cylce, the whole thing starts over again! Any ideas on why this is happening and how to prevent it?