You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1706 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, October 19th 2013, 7:34pm

by JasonDemo (Guest)

I figured something was broken. Thanks for your help!

Friday, October 18th 2013, 9:31pm

by mrfixit

The ratcheting mechanism's worn out.
You'll need to replace the sprinklers.

Friday, October 18th 2013, 8:04pm

by JasonDemo (Guest)

Pop up head turns around when system turns off

Hello all!
I have a pop up head that sprays 180 degrees. When the system shuts off and the tube goes back into the ground, the tube completely flips around in the other direction. So I get a nice hot spot on my lawn and my driveway gets watered. I can walk out there and manually turn the tube head around but it flips around again once the zone is done... I really don't feel like going out in the middle of the night to flip it every time the system runs :)

Any suggestions? Or should I just get a new head? Thank you so much in advance.