You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1744 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Monday, September 9th 2013, 6:05pm

by mrfixit

Try programming a start time on program B and see if the B appears.

Monday, September 9th 2013, 4:58pm

by nightshark

Yes, I looked through that. I'm wondering if the switch is bad...

Monday, September 9th 2013, 4:56pm

by Wet_Boots

Monday, September 9th 2013, 3:11pm

by nightshark

Toro TMC-212


I recently purchased a new house with the Toro TMC-212 controller. I cannot for the life of me get it to switch programs. It has an A,B, & C, but only displays program A on the screen regardless of where I put the switch. Could it be broken? This is also the first time I have messed with a sprinkler system so any help would be appreciated.