You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1847 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Friday, August 30th 2013, 8:04am

by Ag76 (Guest)

Mrfixit, thanks for the reply. I'm going to follow your advice.

Friday, August 30th 2013, 1:03am

by mrfixit

If you're never going to expand I'd go with the PCC. I installed a 12 station about a month ago. Here's the difference for me.

The location of the wire terminals. If your wires are a tad short the Conventional's terminals are at the bottom. The expandable Pro-C the wires run vertical and each wire will need to be a tad longer and longer.

Thursday, August 29th 2013, 11:08pm

by Ag76 (Guest)

Hunter Pro-C Conventional vs. Pro-C Modular

I've seen the Hunter Pro-C recommended on the forum, but would like to know what the difference is between the two and which one is being recommended. I need a 12 station controller, so the modular version will be more expensive than the conventional to get 12 stations. I've skimmed through both manuals, but so far can't tell if there are additional features in the modular version. Any advice will be appreciated.