You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 4520 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Sunday, July 7th 2002, 6:25pm

by globalpilot

I have just setup a connection to the hose bib(Hose bib is the what your hose attaches to at the manual valve outside your home). I too only had a small GPM, around 9. But I was able to keep most of the pressure and increase my GPM to 15 by increasing the PVC Pipe that I ran off the hose bib. I used a 3/4 inch PVC sch40 Pipe and then increased it again to a 1 inch connector to the Sprinkler Valve (I used 1 inch valves) then ran all 1 inch main line PVC sch40 Piping and Poly Piping. Then I used 1 inch tees to a 3/4 threaded adapter and 3/4 inch Poly Pipe to the sprinkler and made all the adjustments so that the 3/4 piping would be stepped down to a 1/2 to connect to the sprinkler.

Anyway the end result was I was able to hook up 5 sprinklers using Rain Bird 1800's and VAN 18' Nozzles. At this point I got most of the use out of the nozzles. I could only use up to 220 degrees but that was enough to cut down on the number of valves from 6 to 4. I covered all the gardens and the turf. I cut the yard in fourth's. Used a mixture of degrees on the nozzles. I used from 20 degree's in some areas and 220 in other areas. Works great and I cut my costs too.

Any questions write.


Wednesday, June 12th 2002, 4:58am

by SprinklerGuy

The valve you hook a garden hose up to?

Sprinkler Solutions, Inc.
Arizona and Colorado
www.sprinklersolutions.net

<img src="http://www.sprinklersolutions.net/files/logo.jpg width=216 height=53 border=0" border=0>



Edited by - SprinklerGuy on Jun 12 2002 10:11:30 AM

Tuesday, June 11th 2002, 5:16am

by Lee Anderson

Not sure what a hosebibb is...Could you tell me what this is?


Monday, June 10th 2002, 3:50am

by SprinklerGuy

ARe you checking the GPM at a hose bibb? Sounds like you are. 6.6 is okay for the hosebibb. If you tap directly into the 3/4 copper you should get 11-14 GPM I would think at 60psi.....just a guess not scientific.

If you do the bucket test at a hosebibb, lots of times the hosebibb is very restrictive, usually it is 1/2 " copper.

Sprinkler Solutions, Inc.
Arizona and Colorado
www.sprinklersolutions.net


Friday, June 7th 2002, 4:12pm

by Lee Anderson

Need more GPM

I have a 5/8"water meter with 3/4" copper service.As far as pressure, i have 60 PSI, but my GPM is only about 6.6 GPM using the five gallon bucket test.Anyway to get higher GPM? At this rate i'll have way too many zones. Need Help ??