You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 438 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, August 19th 2013, 10:49am

by Wet_Boots

If your water supply is as you described, then you can have a 4 gpm head in each corner, and the heads can surely spray at least 36 feet, and get you your coverage. You don't need 8 gpm heads in each corner (but it wouldn't be a bad idea if the dimensions were a couple of feet larger.

If there is a strong steady breeze at all times, then your coverage is affected. I'm assuming you can water in calmer conditions.

Monday, August 19th 2013, 9:25am

by janda.m

so

ok...just want to ask because I was confused...in some tutorials they said that there has to be head to head coverage and other says that there can be only 4 heads in corners....so the final solution is to put 4 pgp ultras (or pgj´s) in the corners and make two section...I have other questions but i will make new topic...thx a lot

Monday, August 19th 2013, 7:11am

by Wet_Boots

There isn't much to be gained by using more than 4 heads in your configuration, even though the space isn't a perfect square. As long as one head is overlapped by one other head, the coverage will not lack. The fact that you don't want a head in the center of the space, is an important reason to go with the 4 corner heads, so that their strong spray will get adequate coverage to the center area.

If there wasn't good pressure, then your layout would be done with nine heads, including a head in the center.

`

Systems in real life don't work exactly like the drawings show the coverage. Rotor heads spray further than drawn, so that wind drift doesn't cost you coverage. Add 2-3 feet of radius to the corner heads, and you are closer to real life.

Monday, August 19th 2013, 4:35am

by janda.m

thx

I just want to know if it will be enough to put 4 pgp´s or pgj´s in the corner and maybe other 2 on the wide side...I dont care about pressure issues because I think it will be enough...my garden is not so large...

should it be like this?..blue are sprinklers http://2i.sk/9aee1c36e5


Sunday, August 18th 2013, 1:52pm

by mrfixit

Hi Janda, I fixed your links so they're clickable now.

If you decide to go with one in each corner maybe during the installation you should add tees and cap them off where you might want a sprinkler later just in case.

Sunday, August 18th 2013, 8:03am

by Wet_Boots

Do the job with 4 PGP Ultras in the corners, and forget the rest. Since 5 bars is over 70 psi, you can easily get 40+ feet from those heads.

Sunday, August 18th 2013, 7:05am

by janda.m

help with design

hi...whats the better sprinkler spacing?...my first zone is about 36ft long and 42ft wide...my design is in the picture...my pressure is 5bars and 16gpm..i want to place 4 90 degree hunter pgj with distance 32ft and on the side two with distance 20ft...should I place also on the other side two with 16ft or is it OK?..i want to avoid to place one in the middle of garden....my second desing is the same but with 6 pgj´s with distance 20ft and 2 with 16 feet...and what sprinkler is better in this case?..pgj or pgp ultra?...thx

1st picture....http://www.2i.sk/517785af7c
2nd...http://www.2i.sk/7422d0fa29