You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1801 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, July 14th 2013, 10:18pm

by Gianni

Thank you, thank you!

After I opened the valve with the bleeder screw and closed it, the water leak stopped after a few minutes. I guess this is just residual water in the line.

Your advice and assurance is priceless.

Thanks again,


Sunday, July 14th 2013, 3:46pm

by mrfixit

If the draining doesn't stop after a few minutes then there's a problem with the valve.
Maybe the solenoid isn't snug.
Maybe there's debris in the valve.
Turn the valve on with the bleeder screw to get any air trapped inside the valve out. Air can cause it to leak.

Sunday, July 14th 2013, 12:00pm

by Gianni

Leaking sprinkler head(s)

To temporarily stop a leaking sprinkler head from flowing water across a front yard sidewalk, I capped it off and discovered the leak transferred to the adjacent sprinkler head. Subsequent research revealed cracked valve diaphragms so I replaced all three zone's 20-year-old valves with new Rainbird in-line valves.

The original leaking sprinkler head is back to leaking. What did I miss?