You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1875 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, May 27th 2013, 7:49pm

by jmed999

Thanks for the reply! That makes sense!

Monday, May 27th 2013, 5:41pm

by Wet_Boots

You could either say 5/8 or "5/8 x 3/4" ~ the second is a modern designation for a meter of 5/8 size and a flow capacity closer to that of 3/4

Monday, May 27th 2013, 4:01pm

by jmed999

Water Meter Size...

I'm filling out Rain Bird and Toro design forms and they ask for a water meter size. My water meter is a Badger model 25 and on the face it says it's a 5/8", 3/4"/ So on the form do I put down 5/8" or 3/4"?