You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 525 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Thursday, May 23rd 2013, 8:02am

by Wet_Boots

You'll need a foot valve on that suction line.

Wednesday, May 22nd 2013, 3:43pm

by JamesCWillard

Thank you again.
It's a hand dug wishing well - we think it's 20 feet max. We will measure the depth.
We plan to sink the water inlet to near the bottom (with screen of course).
I'll let you know how it goes.
We are thinking of trying a 1/2 hp portable pump and see what happens . . .

Tuesday, May 21st 2013, 11:02am

by Wet_Boots

In terms of what will actually work, it's also important to know the diameter of the well shaft. (is it a well point, or a standard 4-inch shaft, or a hand-dug 'wishing well' with stone walls and a bucket on a rope)

Since drawing water from the shaft will almost always lower the water level, you may actually require a "deep well" jet pump, in order to have anything both reliable and portable.

Tuesday, May 21st 2013, 10:03am

by JamesCWillard

Thanks, Wet Boots!

Tuesday, May 21st 2013, 8:54am

by Wet_Boots

Tough question. Unless you use 3/4-inch inside diameter, you will lose a great deal of pressure through a 200-foot hose, even to run a single hose-end sprinkler. Also, a 20-foot lift is on the very edge of the performance capability of a pump.

Tuesday, May 21st 2013, 8:30am

by JamesCWillard

Pumping from an open Well

I want to pump water from a 20 foot deep open well in NH and supply a 200 foot hose with one lawn sprinkler. Can someone recommend the best portable 120 volt reliable pump for us to use?