You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 569 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, May 5th 2013, 11:41am

by Scott76

Try to manually run each zone. If the timer provides an error code that would be really helpful in determining the problem.

Sunday, May 5th 2013, 7:56am

by Wet_Boots

It is not possible to run six zones simultaneously. Go back to your owner's manual and doublecheck every program setting.

Sunday, May 5th 2013, 6:49am

by Rmiclette

System will not run all programmed zones

Hello. I recently bought a home with a hunter pro-c controller. I have programmed the sprinkler system to run all six zones at one time. For some reason when the program runs it only runs the first zone. I have reset the controller and re programmed it multiple times but the same thing is happening. Any help would be much appreciated or if you can point me in the direction of a similar discussion thread that would be great.