You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 486 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Thursday, May 2nd 2013, 2:06pm

by Scott76

IF it went into a water line you might possibly see a valve stick on or a head not flow properly. It might not hurt anything for years to come. There is really no exact answer to that problem.

Sunday, April 28th 2013, 7:12pm

by richard1975

Watts 0802 vent assembley

When I did my start up on my system water started to come out of the top of the backflow preventer. I shut the water off and open the cap on the backflow and the vent float was broken. It looks like a white plastic crown with 4 stems on top. Well one of the stems broke off. I was wondering if that white plastic pc. went down into one of the water lines, and if did will it do any damage? Any help would be great. Thanks Rick