You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 1899 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Saturday, April 13th 2013, 10:46am

by Wet_Boots

Do the heads do anything other than water already-established shrubs? Lots of older systems get by with shrub sprays getting overgrown. If you still need to get water to every plant in an overgrown bed, you will have a few choices, but all of them will make for a more fragile sprinkler system.

The one important consideration for a good drip install is protecting the pipe and components from damage with a thick covering of mulch. The old-school 'textbook' drip install lays out the components on top of bare soil, then adds six inches of mulch atop the pipe and fittings. For most cheaply-done drip installs, emitter tubing is used, and thinly covered, if at all.

Friday, April 12th 2013, 10:36pm

by Kpierce

Soaker hose or soaker heads on existing system

I have several high riser heads and when they come on the windows next to them get wet and leave residue behind, and the heads are no longer tall enough to spray over the bushes. So I thought it would be nice if I could replace them with some type of soaker hose, or soaker heads...
This way the water would stay on the ground and seep to where it is needed, instead of just spraying into the windows and back of the bushes.
I am not familiar with what is available on the market. I don't want to damage or limit my current system.