You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 6188 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Sunday, January 6th 2002, 7:11pm

by SprinklerGuy

We use King Nuts. They are wire nuts with sealant, silicone type, inside. We love them. Sure a heck of a lot easier than pentites!

Tuesday, January 1st 2002, 12:59pm

by SprinklerWarehouse Irriga

Yes grease caps can be used in place of silicone sealed wire connectors. However, silicone sealed wire connectors are the easiest to use since you simply twist the wire nut onto the wire connection which pops the silicone bubble and covers the wire connection.

Grease caps degrade with time also. The grease breaks down and over time you may have corrosion or moisture problems. I highly recommend silicone sealed wire connectors.
<img src=icon_smile.gif border=0 align=middle>

Monday, December 31st 2001, 12:27pm


Wire Nut Sealers

Are grease canps the same as silicon seal nuts?