You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 406 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Saturday, March 9th 2013, 3:46pm

by Wet_Boots

Some controller displays will flash the minutes-remaining number while a zone is on. An electrical multimeter is very inexpensive and worth having. You can even buy one this weekend at a Harbor Freight store for all of two dollars.

`

How to troubleshoot with your multimeter

Saturday, March 9th 2013, 9:27am

by nowaterflow

Thanks for your reply
I don't really know how to do that, but I can figure it out. Does anyone know if the time (time meaning 10 min. or whatever duration is set) should blink/flash when the sprinkler is running or should the time be on not flash/blinking?
Thanks

Saturday, March 9th 2013, 8:29am

by Wet_Boots

Get a multimeter and see if the zone wiring is intact. With the controller off, check the resistance from the output common to one of the zone wires.

Friday, March 8th 2013, 3:52pm

by nowaterflow

watering duration time blinks/flash

I bought a house that already has a sprinkler sustem installed. When I try and run a zone the time to run blinks and counts down but no water comes out of heads. Like zone 1 set on 10 minutes .... should the 10 blink/flash or should it stay on?
What does the time flashing indicate.
Thanks, I don't know anything about sprinkler systems. Trying to learn.
Rainbird s8si