You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2017 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Friday, February 8th 2013, 2:43pm

by Wet_Boots

try to post a photo of the old valves

Since we don't know what heads you are talking about, there is no way for me to turn "12 heads" into a rate of flow to match a valve to

Friday, February 8th 2013, 10:07am

by cycleruss6 (Guest)

Replacing old control valves

I have an older system in my front yard now. The solenoids are cracked and do not work. The manufacturer is out of business and I am unable to find a replacement. The valves are 1 1/4" with hard piped lines. My question is; should I replace the valves with a 1 1/2" valve or a 1" valve? Will either of these soultions work? I am also planning to add two more zone to my system, approx 12 heads. Any advice offered would be appreciated.