You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 733 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Sunday, December 16th 2012, 7:11pm

by mrfixit

Since you're talking years down the road. I'd dig it up and put the taller riser on with a cap.
---
If there's not a screen under the nozzle you wont be able to turn it off. If the screen is damaged it might dribble some. A new screen might help.
--
I don't know of a cap to replace the nozzle.

Sunday, December 16th 2012, 5:53pm

by NABRIL

Way to better close off a nozzle head

Hello
I know that I can turn the screw clockwise on top of the nozzle in order to close the flow of water, but for some reason I have 2 that still spurt out water despite tightening that screw. I also know that, if I wanted, I could dig around the area, remove the riser, and screw in a threaded pvc cap. If I do that and I want to re-enable that nozzle in say 4 years, I will have no way of locating where that cap is.

Is there some female threaded "cap" that can be screwed into the riser in place of a nozzle?
I guess I could remove the riser, screw in a 4 inch riser pipe and cap it. In 4 years it should be less difficult to locate that white cap. No?

thanks