You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 696 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Monday, November 26th 2012, 7:30pm

by mrfixit

If you figure your outlet has power like Boots suggested, make sure the faceplate is plugged in all the way.
Could also be the transformer.
Is the back up battery dead? Do you get a display if you install a new battery?
Maybe take out the battery, unplug it, wait a couple minutes and plug it back in. See what happens.

Monday, November 26th 2012, 6:19pm

by Wet_Boots

Never assume. Make certain the controller is plugged into a live outlet. If the controller is hard-wired, you need a multimeter to confirm input voltage.

Monday, November 26th 2012, 6:02pm

by rockypoint

Hunter Pro C

Can someone help me? my hunter pro c timer control does not indicate any information on the face. My house has electiricty so i dont understand what else could be the problem?