You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 673 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 4 posts

Thursday, October 18th 2012, 9:14am

by Wet_Boots

The Hunter wireless rain sensor is a disposable item, so it is doomed no matter what, since you can't change its battery.

Wednesday, October 17th 2012, 7:06pm

by njchoochoo

Thanks Wet Boots. The system worked fine until sometme during this year, possibly at the beginning. I didn't notice a problem until mid season. Nothing was changed from when the original system was installed roughly 6 years ago.

Wednesday, October 17th 2012, 6:54am

by Wet_Boots

It may depend on how the sensor is connected to the controller. Even though your controller has two terminals specifically for connecting a rain sensor, some installers will connect it directly to the common wire, as was done in the old days.

Read up on this in your owners manual.

Tuesday, October 16th 2012, 8:13pm

by njchoochoo1

Hunter Wireless Rain Click Issue

I have the above rain sensor. Anytime the switch on the controller (Rain Bird ESP-4M) is in normal, the alarm light illuminates, and the system will not run. If I move the sensor selector to bypass, the alarm light goes out, and the system works. The sensor is registering rain. After a rain, the bypass light illuminates red on the rain click display, and when the sensor dries out the green light illuminates. My question, since I don't have much spare cash to deal with, is the sensor bad, or is it a problem with the controller? My thanks for any advice.