You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 697 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Wednesday, October 3rd 2012, 7:23pm

by Wet_Boots

have a beer

order new controller :thumbup:

Wednesday, October 3rd 2012, 6:28pm

by hi.todd

Unplug the clock.

Unlock the modules

Pull out all modules

Reinsert all modules.

Lock all Modules.

Plug in.

Try to activate the clock.

Wednesday, October 3rd 2012, 3:51pm

by joe13

Hunter pro-c controller problem

my house took a lighting strike and caused my system to stop working. I replaced the face plate and now the system sporadically recognizes all the zones and sometimes it does not. I have 3 modules inside and I beleive two control 3 zones each and then a larger one that controls 9 zones. It seems that the the module at the bottom works all of the time with the exception of zone 3, and then the second module works all or nothing and the same for the larger module, except it appears that zone 9 and 15 do not work at all. all the sones show up on the faceplate when I program it and they show taht they are working when I run each zone in the manual mode, but no water.
so my question is what do I need to check, test or replace? modules, inner workings, ????
Thanks....Joe