You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2266 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 2 posts

Wednesday, September 26th 2012, 1:52pm

by Wet_Boots

Under-head anti-drain valves will subtract pressure from the sprinkler head, according to their setting.

Wednesday, September 26th 2012, 11:44am

by juanybm

anti-drain valves

I would appreciate some help understanding how anti-drain valves work. I have a wastewater aerobic system with spray irrigation. The starting operating pressure is 30psi and the total pressure required for the pump is 35.6psi. The lot downslopes away from the pump approx 8ft below pump-off switch. I want to control low-head drainage but the specs of the valve I'm considering have a preset pressure of 5psi (12ft of head) and can be adjusted to 14psi (32 ft of head). This valve will be installed on the pipe under the sprinkler head. Will this valve work?

?( :?: :S