You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2097 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The first post

Monday, September 24th 2012, 3:08pm

by eshara (Guest)

Head Placement

So I have a question on head placement... I have 45psi static pressure, 3/4 main service line, tapped off main with all 1" pipe/backflow preventer/valves.

I have one zone that has minimal grade change with only a short distance from the valve. The lawn is a 40'x32'.

My though was to just use (4) Rainbird 5000 Series in the corners spraying quarter circles.

If I can get a 32' spray I should have head to head coverage on way and almost head to head the opposite way??

Thanks for your help!!!