You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2093 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Tuesday, September 25th 2012, 12:59pm

by TJ

Thats my very next step. Didn't do it the first time because the leak and water were obvious.

Monday, September 24th 2012, 1:07pm

by Wet_Boots

When you measured the resistances of the various zones with your multimeter, what did you get for results?

Monday, September 24th 2012, 9:07am

by TJ

Controller shorted out?

I had a weathermatic 12 station controller that kept on blowing the fuse. I thought I traced the issue to a valve manifold that sprouted a leak getting all the wires wet(submerged) cleaned everything and dried it out. Plugged the transformer in and the fuse blew immediately and the controller seems like the board around the fuse connection is dark. Could I still have a short back at the control valve mannifold? Before I replace the controller with a new one how can I test to make sure I dont blow another fuse?