You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 695 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 5 posts

Monday, September 24th 2012, 12:27pm

by ReddHead

This might be right up your alley and fairly affordable.

http://www.instructables.com/id/Arduino-Laser-Tripwire/

Instead of turning the LED on and off you can have it turn a relay on and off that controls the 24VAC to the solenoid.

Saturday, September 22nd 2012, 12:05pm

by Wet_Boots

Sprinkler controllers don't run on sensor command. You have to work things another way entirely. Due to the rise of solid state control systems, there are mountains of relays to be had for cheap on ebay. All you require is a class-2 24VAC power transformer to power the sprinkler valves. It's up to you then to connect the dots with the sensors and the relays. There should be some sensors to be had that could run on 24 VAC.

Saturday, September 22nd 2012, 8:45am

by scary_project (Guest)

Probably a good way to get the sprinklers kicked to pieces.


it's for a project where the aim is to get people wet - they'll be expecting it, so i think the sprinklers will be fine. there are other items which i'm looking to run off sensors also, but i'm wondering how i could go about getting the sprinklers. any ideas please?



cheers,

Saturday, September 22nd 2012, 8:31am

by Wet_Boots

Probably a good way to get the sprinklers kicked to pieces.

Saturday, September 22nd 2012, 6:52am

by scary_project (Guest)

can this be done (controller/ sensor)?

hey guys,



i'm looking to set up some sprinklers (alongside some other things) running off some motion sensors. basically, as someone walks through and sets the sensor off there will be a few sprinklers around that will activate and get them wet - which i'll set up varied between jet and spray action. having had a look around without joy i thought i'd ask the experts. can this be done?



i was thinking of running the sensors and sprinklers to a computer and having it receive the signal from the sensors and control the sprinklers, though having them controlled by a controller with input from the sensors would also work.



any help would be great! :)



cheers,