You are not logged in.


Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 2101 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 3 posts

Saturday, September 22nd 2012, 3:12am

by Wet_Boots

echo the advice to call the installer

Friday, September 21st 2012, 10:46pm

by mrfixit

Two valves only need three wires.
Just look at the controller and see what colors are hooked up.
Red for example, valve 1
Blue for example valve 2.
If you can't figure it call the dude who installed it. It's under warranty.

Friday, September 21st 2012, 8:40pm

by Leoroman

Valve wiring

Hi, I am in need of desperate help. I had a sprinkler system installed in my back yard recently. There were two zones installed but only one turns on automatically, I noticed the valve wiring looks not correctly connected. I researched on the color coding and "how to" wire on your site but my valves have 9 to 10 color coded wires coming out of them and I am not sure how to connect them all. Please help.....