You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 766 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 6 posts

Monday, September 17th 2012, 12:21pm

by Wet_Boots

A pump guy is my first thought. This is out of the comfort zone of most sprinkler guys.

Monday, September 17th 2012, 8:57am

by bocaman (Guest)

an overload is what trips the breaker - it doesn't have to be a dead short


Thanks. Should I be calling an electrician for this or the sprinkler company?

Friday, September 14th 2012, 10:39am

by Wet_Boots

an overload is what trips the breaker - it doesn't have to be a dead short

Friday, September 14th 2012, 8:39am

by bocaman (Guest)

Motors sometimes need their starting capacitors replaced.
Thanks. WIll look at that. Would the starting capacitor cause a short circuit?

Thursday, September 13th 2012, 1:13pm

by Wet_Boots

Motors sometimes need their starting capacitors replaced.

Thursday, September 13th 2012, 9:33am

by bocaman (Guest)

motor hums and trips breaker

We just bought a home with 4 zone sprinkler fed from lake that is about 15 years old. The sprinkler stopped working after a few weeks of buying the home, so I tried to figure out the timer and found that timer was pretty much rusted and had broken pins inside. I turned it to ON but the sprinkler didn't turn on even after I set it to ON. I heard click in the timer but nothing outside on the motor. So I looked at the flip switch outside which seemed to have been shutoff for some reason and I tried flipping it on and off a couple of times and the motor suddenly started running and sprinklers came on, I turned it off and on to cycle through each zone and it worked well.
I set it back to off and decided to turn it on manually till I could get the replacement timer. When I turned it on next time it made a click sound and after a few seconds the breaker tripped. and it kept happening every time I tried after that.
Yesterday I replaced the timer, but the flip switch for outside I bought was the 15 amp one and the current switch was different so I didn't replace that switch but replaced the timer. I turned the timer to ON, heard the click and the motor outside started humming for a few seconds and then the breaker tripped again.
So I am not sure if there is a short somewhere on the flip switch since it had created problems in the past when I had to turn ti on and off a few times to make it work or something else.
I will be replacing the flip switch soon, but if anyone can guide me to what all I can check if that doesn't fix it, I will appreciate it.
Thanks in advance for your help!

Regards,
Bocaman