You are not logged in.

Reply

Dear visitor, welcome to SPRINKLER TALK FORUM - You Got Questions, We've Got Answers. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Attention: The last reply to this post was 774 days ago. The thread may already be out of date. Please consider creating a new thread.

Message information
Message
Settings
Automatically converts internet addresses into links by adding [url] and [/url] around them.
Smiley code in your message such as :) is automatically displayed as image.
You can use BBCode to format your message, if this option is enabled.
Security measure

Please enter the letters that are shown in the picture below (without spaces, and upper or lower case can be used).

The last 7 posts

Monday, September 10th 2012, 10:00am

by hi.todd

Thanks for responding back.

Even though the sensor is set to bypass, if the sensor was not connected to the timer, but instead the field wires. The sensor Bypass switch will not work or bypass your rain sensor. You can tell by opening up the controller and look to see if there are any cables connected to the sensor post. Or do you have wire nuts in the compartment of the controller.

Check it out.

Dan

Sunday, September 9th 2012, 11:51pm

by jacksonjtb128

Possible problems

There are (2) things that come to mind when a system is working intermittently.
First-Even though the wires seem snug, they might be loose inside the connectors or at the solenoids, or corroded. Since all of the zones are giving you trouble I would check the common wire connection.
Second-It could be a problem with the controller. If it is a dial type, that might be the problem. Or one of the buttons might be faulty.

The sprinkler valves might be in a box in the ground or they might be above ground, it depends on what area of the country you live in.

Sunday, September 9th 2012, 7:55pm

by erikS

Thanks for all the advice so far. Sorry for not responding, the system randomly started working after I posted last time I posted. It seems to be sporadically not wanting to work (case in point, it's not working again).

@hi.todd - The rain sensor is set to "off" on the control box. It had rained when I posted it, but it hasn't rained this time.

@mrfixit - Yes, I am certain the outlet is working. Anything I plug into it works perfectly.

@Double_kyan - This is where my complete and utter incompetence comes in. Are the sprinkler valves on each sprinkler? Or are they somewhere else?

Again, thanks for helping out someone who has absolutely no idea what he's doing. :S

Saturday, August 18th 2012, 5:16pm

by hi.todd

Also Check the rain Sensor.

And has it rained?

Saturday, August 18th 2012, 10:20am

by mrfixit

Are you sure the outlet for the controller is working?

Saturday, August 18th 2012, 12:34am

by Double_kyan

maybe someone turned off a ball/gate valve somewhere..have you tried to turn them on manually[from the sprinkler valves]? if they turn on manually and since you know how to turn it on automatically i would think a bad connection at the valves

Friday, August 17th 2012, 9:07pm

by erikS

System not working now

First, sorry if I don't give enough information. The previous owner of thie house is the one who installed it and I only just moved in. The system is an Orbit but I'm not sure of the model number. The system has been working fine up until today. The control box has power but whenever I turn the dial to auto, push the manual button and then the enter button to turn the system on, nothing happens. Neither the sprinklers or the misters will pop up. I don't hear water running anywhere so I don't think they're stuck.

I checked the fuse in the control box and it's fine. The wires running to the control box are snug so I don't think they're loose. I've used the system for the last two days without a problem. Any ideas?